PCB Layout

How to Select Routing Layers for High-Speed Signals in PCB Design
2026-04-21
For long‑distance high‑speed signals (especially backplanes), routing layer selection is critical to avoid excessive high‑frequency loss. This article compares microstrip (surface) and stripline (inner layer) routing using simulation.
Summary of Common PCB Processes
2026-04-20
PCB process is critical in engineering, especially in large companies. It covers manufacturing constraints such as trace-to-via clearance, via aspect ratio, panel utilization, back-drilling depth, etc. This article summarizes the most commonly used PCB processes for designers.
Three Typical Via Types in PCB Design
2026-04-20
All traces on a PCB are etched on the copper layers of the stackup. However, routing can rarely be completed on a single layer—except for simple LED boards on aluminum substrates, which carry only current and need no layer changes.
A Brief Discussion on Electromagnetic Interference (EMI) Caused by Switching Power Supplies
2026-04-20
Switching power supplies are widely used due to high efficiency, wide adjustable output voltage, low loss, small size, and light weight. However, they tend to introduce electromagnetic interference (EMI) issues.
PCB Design Review: EMC Issues
2026-04-20
A control product failed RE (Radiated Emission) and CE (Conducted Emission) tests due to serious defects in PCB layout and routing.
RF PCB Circuit Layout and Routing Guidelines
2026-04-17
The PCB is an indispensable part of electronic products, providing electrical and mechanical interconnection for the circuit system. Proper component arrangement is critical for stable and reliable performance, especially for integrated circuits. Poor layout degrades function or causes failure. This article introduces key considerations for RF PCB design.
Go to page