PCB LAYOUT

PCB Line Structure

2026-05-21

The physical entity on which a circuit system depends is the PCB (Printed Circuit Board). The interconnection of components (including both electrical and mechanical connections) is realized through metallized traces on the surface of the dielectric or between dielectric layers, while traces on different layers are connected via electroplated vias.

MORE DETAILS

Never Overlook the Importance of Line Width and Line Spacing in PCB Design

2026-05-21

To achieve high-quality PCB design, in addition to the overall routing and layout, the rules for line width and line spacing are also extremely critical, as they directly determine the performance and stability of the circuit board. Therefore, taking RK3588 as an example, this article introduces the general design rules for PCB line width and line spacing in detail.

MORE DETAILS

What Problems Need to Be Solved by PCB and What Problems Need to Be Solved by Chip

2026-05-20

As the carrier of various components and the hub of circuit signal transmission, PCB is the most critical part of electronic products, and its quality directly determines the quality and reliability of the whole equipment.

MORE DETAILS

What Are the Heat Dissipation Techniques for PCB Circuit Boards

2026-05-20

For electronic equipment, a certain amount of heat will be generated during operation, which causes the internal temperature of the equipment to rise rapidly. If the heat is not dissipated in a timely manner, the equipment will continue to heat up, components will fail due to overheating, and the reliability of the electronic equipment will decrease. Therefore, effective heat dissipation treatment of the circuit board is extremely critical.

MORE DETAILS

There Are So Many Exquisite Details in PCB Pads

2026-05-19

In PCB design, the pad is a critical concept that must be familiar to every PCB engineer. However, despite their familiarity with pads, many engineers only have a superficial understanding of the professional knowledge related to pads.

MORE DETAILS

Analysis of Precautions for the Use of SMT Red Adhesive

2026-05-19

Red adhesive is a polyolefin compound. Different from solder paste, it cures upon heating, with a solidification point of 150℃. At this temperature, the red adhesive starts to transform directly from a paste state to a solid state.

MORE DETAILS

Summary of 30 PCB Layout Tips

2026-05-18

This article summarizes 30 practical PCB layout tips from senior engineers, covering Altium Designer shortcut operations, component layout, routing, power supply design, EMC optimization, packaging, and final inspection, to help designers improve PCB layout efficiency and quality.

MORE DETAILS

Practical Tips | Six Principles for Excellent PCB Circuit Board Design

2026-05-18

Six Principles for Excellent PCB Circuit Board Design

MORE DETAILS