PCB Layout

Five Via Processes for PCB Solder Mask Ink
2026-04-09
PCB solder mask inks are classified by curing method into photosensitive developing ink, thermosetting ink (cured by heat), and UV-curable ink (cured by UV light). By substrate type, they are divided into solder mask ink for rigid PCBs, solder mask ink for FPC flexible PCBs, and solder mask ink for aluminum substrates (which can also be applied to ceramic substrates).
Via-in-Pad Technology and Different Via Processes in PCB Design
2026-04-09
Multi-layer PCB design requires a method to establish connections between layers, which is achieved through vias ranging from through-hole vias to via-in-pad technology. Traces serve as horizontal connecting elements, while vias act as vertical connecting elements, enabling the transmission of signals and power between board layers.
An In-depth Discussion on the Three Key Aspects of Power Integrity Design
2026-04-08
In modern electronic design, power integrity is an indispensable part of PCB design. To ensure the stable performance of electronic equipment, a comprehensive consideration and design must be taken from the power source to the receiving end. Only through elaborate design and optimization of power modules, inner-layer planes, power supply chips and other components can true power integrity be achieved.
Antenna Design Guide: Key Elements for Building High-Efficiency Wireless Communication
2026-04-08
Designing and optimizing an antenna is no easy task. When it comes to designing an industrial Internet of Things (IIoT) antenna, a reference design can be used as a starting point. The question is, what parameters can be modified to optimize the design when applying it to the final product design?
Multi-layer PCB Impedance Line Routing Techniques
2026-04-08
PCB impedance is a combination of capacitance and inductance of a circuit during high-frequency operation. Although it is also measured in ohms (Ω), it differs from resistance, which is a DC characteristic. Impedance is an AC characteristic, meaning it is related to frequency, while resistance is not.
Minimizing Loop Area Through PCB Grounding Design
2026-04-07
Excellent PCB design is reflected not only in electrical performance indicators, but also in EMC performance and anti-interference capability. One of the most important factors determining PCB indicators is PCB grounding design.
PCB Routing Rules for BOOST Topology
2026-04-07
The peripheral circuits of switching power supplies have become quite simplified with technological development, especially DC-DC power supply systems, which typically consist of only a few components such as chips, inductors, Schottky diodes, capacitors and resistors, appearing simple and easy to use.
Skin Effect: An Indispensable Factor in High-Speed Circuit Design
2026-04-06
Editor's Note: A preliminary introduction for further discussion – In high-speed circuit design, we often focus on chip driving capability, PCB dielectric constant, dielectric loss angle, connectors, cables, etc. In fact, the surface roughness of conductors (copper) also exerts a significant impact, especially as signal rates continue to rise. Therefore, every circuit-related factor is crucial in high-speed circuit design.
Go to page