PCB Layout

How to Reliably Align Compression-Mount Connectors for Millimeter-Wave Applications
2026-07-18
At frequencies below a few gigahertz, the impacts of soldering process variations and other manufacturing and assembly factors are typically benign with good design practices.
Requirements of High-Speed Development on High-Frequency Characteristics of PCBs
2026-07-17
With the rapid progress of the communication industry, the original civil communication frequency bands are crowded, and some high-frequency communication frequency bands (military) are gradually transferred to civil use. Civil high-frequency communication has achieved unconventional rapid development, and is widely used in satellite reception, base stations, navigation, medical treatment, transportation and other fields.
EMC ESD Rectification Scheme for Optimizing PCB Layout and Routing
2026-07-17
Electronic products such as mobile phones, smart watches, and TWS earphones often need to undergo electrostatic discharge (ESD) testing during certification. In the test, unrecoverable failures or system reset and restart may occur.
An Interpretation of the Three Core Characteristics of Rigid-Flex PCBs
2026-07-16
Rigid-Flex Printed Circuit Board, abbreviated as Rigid-Flex, is a circuit structure that integrates both rigid substrates and flexible circuits on a single circuit board.
Why Thick Copper PCBs Are Required for High-Current Applications
2026-07-16
As the name implies, a thick copper PCB is a printed circuit board with a thicker copper conductive layer. Some manufacturers distinguish PCBs with a copper thickness of ≥2oz from standard boards and define them as thick copper PCBs.
Why Use Thick Copper PCBs? What Are the Advantages of Thick Copper PCBs?
2026-07-15
A thick copper printed circuit board contains more than three ounces of copper material per square foot, designed to carry high current loads.
What is the Standard Copper Foil Thickness for PCBs?
2026-07-15
Copper foil is a cathodic electrolytic material, a thin and continuous metal foil deposited on the base layer of a printed circuit board, which acts as the conductor of the PCB. It readily adheres to the insulating layer, accepts the printed protective coating, and forms circuit patterns after etching. The mirror solderability test is a flux corrosivity test using a vacuum-deposited thin film on a glass plate.
Go to page