Copper foil is a cathodic electrolytic material, a thin and continuous metal foil deposited on the base layer of a printed circuit board, which acts as the conductor of the PCB. It readily adheres to the insulating layer, accepts the printed protective coating, and forms circuit patterns after etching. The mirror solderability test is a flux corrosivity test using a vacuum-deposited thin film on a glass plate.
Copper foil is a cathodic electrolytic material, a thin and continuous metal foil deposited on the base layer of a printed circuit board, which acts as the conductor of the PCB. It readily adheres to the insulating layer, accepts the printed protective coating, and forms circuit patterns after etching. The mirror solderability test is a flux corrosivity test using a vacuum-deposited thin film on a glass plate.
Copper foil is made of copper mixed with a certain proportion of other metals. There are generally two types of copper foil: 90 foil and 88 foil, referring to copper contents of 90% and 88% respectively, with a size of 16×16 cm. Copper foil is a widely used decorative material.
Common international PCB copper thicknesses are 35μm, 50μm, and 70μm.
The copper foil (copper cladding) thickness of general single-sided and double-sided PCBs is approximately 35μm (1.4mil), with alternative specifications of 50μm and 70μm. The surface layer thickness of multilayer boards is generally 35μm = 1oz (1.4mil), and the inner layer is 17.5μm (0.7mil). 70% of circuit boards use a finished copper foil thickness of 35μm, which mainly depends on the PCB application and the voltage and current of the signals. In addition, for PCBs carrying high currents, some use 70μm copper thickness, 105μm copper thickness, and very few even use 140μm, etc.
Copper thickness is usually expressed in oz (ounce). 1oz means the thickness of copper when 1oz of copper is uniformly coated on an area of 1 square foot, which is approximately 1.4mil. It represents the average thickness of copper foil by weight per unit area. Expressed by a formula: 1oz = 28.35g/ft² (ft² is square foot, 1 square foot = 0.09290304 square meters).
Copper thickness varies with applications. Common thicknesses of 0.5oz, 1oz, and 2oz are mostly used in consumer and communication products. Copper thickness above 3oz is classified as heavy copper products, mostly used for high-current applications such as high-voltage products and power boards.
Copper thickness (trace width) affects current carrying capacity. Although there are formulas to directly calculate the current-carrying capacity of copper foil, actual circuit design is far more complex, so safety factors must be fully considered in the design process.
Characteristics of Copper Foil
Copper foil has low surface oxygen content and can adhere to various substrates such as metals and insulating materials, with a wide operating temperature range. It is mainly used for electromagnetic shielding and antistatic purposes. Placing conductive copper foil on the substrate surface combined with a metal substrate provides excellent conductivity and electromagnetic shielding effects. It can be classified into self-adhesive copper foil, double-conductive copper foil, single-conductive copper foil, etc.
Electronic-grade copper foil (purity ≥99.7%, thickness 5μm–105μm) is one of the basic materials for the electronics industry. With the rapid development of the electronic information industry, the usage of electronic-grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium-ion batteries, civil televisions, video recorders, CD players, copiers, telephones, air conditioners, automotive electronic components, game consoles, etc.
The domestic and international market demand for electronic-grade copper foil, especially high-performance electronic-grade copper foil, is growing steadily. Relevant institutions predict that by 2015, China’s domestic demand for electronic-grade copper foil will reach 300,000 tons. China will become the world’s manufacturing base for printed circuit boards and copper foil, and the market for electronic-grade copper foil, especially high-performance foil, is promising.
Supply Status of Copper Foil
Industrial copper foil is commonly divided into two categories: rolled annealed (RA) copper foil and electrodeposited (ED) copper foil. Rolled copper foil features excellent ductility and was used in early flexible circuit board manufacturing processes, while electrolytic copper foil has the advantage of lower cost compared to rolled copper foil. Since rolled copper foil is a key raw material for flexible boards, the property improvement and price changes of rolled copper foil have a certain impact on the flexible circuit board industry.
Due to the small number of rolled copper foil manufacturers and technical monopolies held by a few companies, customers have limited control over pricing and supply. Therefore, replacing rolled copper foil with electrolytic copper foil is a feasible solution without compromising product performance. However, in the coming years, the physical structural properties of copper foil will affect etching performance; in fine-line or miniaturized products, as well as high-frequency products considering electrical signal characteristics, the importance of rolled copper foil will rise again.
There are two major barriers to producing rolled copper foil: resource barriers and technical barriers. Resource barriers mean that rolled copper foil production requires copper raw material support, making resource possession critical. On the technical side, barriers deter new entrants; in addition to rolling technology, surface treatment and oxidation treatment technologies are also critical.
Leading manufacturers mostly possess extensive technical expertise and key know-how, raising entry barriers. New entrants adopting post-processing production face cost constraints from established manufacturers, making market entry difficult. Thus, the rolled copper foil market remains highly monopolistic.
Development of Copper Foil
Copper foil is a critical material for copper clad laminates (CCL) and PCBs. In the rapid development of the modern electronic information industry, electrolytic copper foil is known as the "neural network" for signal and power transmission in electronic products. Since 2002, China’s printed circuit board production value has ranked third in the world, and China has also become the world’s third-largest producer of CCL, the substrate material for PCBs.
This has driven the rapid development of China’s electrolytic copper foil industry in recent years. To review the past, present, and future of the global and Chinese electrolytic copper foil industry, the China Epoxy Resin Industry Association has conducted a review of its development.
From the perspective of production layout and market development changes in the electrolytic copper foil industry, its development can be divided into three major periods: the initial establishment of global copper foil enterprises and the start of the electrolytic copper foil industry in the United States; the period of full global market monopoly by Japanese copper foil enterprises; and the period of multi-polar global market competition.
About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.