PCB Layout

Design Sharing: PCB Gold Fingers – The Complete Process from Design to Production
2026-10-15
This article provides a detailed introduction to the functions and uses of "Gold Fingers" in PCBs, including interconnection points, special adapters, and external connections. It also explores design‑for‑manufacturability (DFM) aspects such as chamfering, solder‑mask opening, copper pour on routing layers, and other details. The article also covers the production process, including broken Gold Finger fabrication and electroplating techniques. The importance of DFM inspection for Gold Finger des
Why Is RF Design Becoming Increasingly Difficult?
2026-10-13
Just like life itself, we often tell ourselves that if we push a little harder today, tomorrow will surely be easier. The same holds true for RF design – we always hope that the next project will have slightly looser requirements, be a little simpler to design, or at least match the difficulty of the current one. But reality rarely cooperates.
Five Via Treatment Methods for PCBs and Their Application Scenarios
2026-10-09
PCB solder mask inks can be classified by curing method: photosensitive developing inks, thermally cured inks, and UV‑cured inks. By board type, there are solder mask inks for rigid PCBs, flexible PCBs (FPC), and aluminium‑based PCBs (which can also be used on ceramic boards).
Analysis of Whether a PCB Can Carry 100–150A High Current
2026-10-06
The author has analysed whether a PCB can carry high currents of 100–150A. Let us take a look.
Common PCB Laminate Materials – Detailed Parameters and Applications
2026-10-03
PCB substrates can be broadly classified into five categories based on the reinforcement material: paper‑based, fibreglass‑woven fabric‑based, composite‑based (CEM series), build‑up multilayer board substrates, and special‑material substrates (ceramic, metal‑core, etc.). When classified by the resin adhesive used, common paper‑based CCLs include phenolic resin types (XPC, XXXPC, FR‑1, FR‑2, etc.), epoxy resin types (FR‑3), and polyester resin types. Common fibreglass‑woven fabric‑based CCLs incl
Stray Capacitance Hidden in the PCB – The Silent Killer
2026-10-01
If you have ever worked on hardware development, you have probably encountered this frustrating situation: you carefully select a crystal oscillator that matches the specifications, solder it onto the board, and it either fails to start up or the frequency drifts wildly. You try several different crystals, but nothing works. In many cases, the problem is not poor crystal quality – it is the ubiquitous "invisible capacitor" hiding in your PCB: stray capacitance. Today, we are going to dissect thi
Can a Tiny Drill Hole Really Cause an Entire PCB to Fail?
2026-09-29
Every layout engineer knows just how complex the PCB manufacturing process can be.
Go to page