PCB Layout

Ten Simple and Practical PCB Heat Dissipation Methods
2026-04-17
PCB (Printed Circuit Board) is a key electronic component that provides mechanical support and electrical interconnection for electronic devices. It is called a “printed” circuit board because it is fabricated using electronic printing technology.
How to Design PCB Safety Clearance?
2026-04-17
In PCB design, there are many aspects that need to consider safety clearance, which can be roughly divided into two categories: electrical safety clearance and non-electrical safety clearance.
104 PCB Circuit Design and Manufacturing Terms
2026-04-16
a summy of PCB Circuit Design and Manufacturing Terms
Advantages of Laser Solder Ball Placement Technology in BGA Chip Packaging
2026-04-16
BGA stands for Ball Grid Array, a packaging technology for integrated circuits using organic substrates. It is widely used for permanent mounting of microprocessors and provides far more interconnection pins than dual-in-line or flat packages. BGA utilizes the entire bottom surface of the package (not just the edges), and the internal traces connecting the die to the solder balls are shorter, delivering better high‑speed performance.
Internal Architecture Design of PCBs with Various Stack‑up Structures
2026-04-15
Hardware engineers new to multi‑layer PCB design often feel confused when facing 8‑layer, 10‑layer or higher boards with dense, web‑like routing.
11 FAQs About PCB Impedance Design
2026-04-15
Impedance is something every engineer works with, but few can explain it clearly. It seems simple yet is hard to put into words.
Thermal Design Technology for Power Supply Systems
2026-04-15
Our designed DC-DC power supplies generally include components such as capacitors, inductors, Schottky diodes, resistors, and integrated circuits. The conversion efficiency of power products cannot reach 100%, so power loss is inevitable. These losses are manifested as temperature rise, and poor thermal design will accelerate the lifespan degradation of the power system.
An In-depth Analysis of the Return Path of Differential Signals
2026-04-14
A single-ended signal is transmitted through a single signal line with the ground plane as the reference. In other words, a single-ended signal is the potential difference between a single conductor and the ground plane during transmission. This requires the reference ground potentials at the signal source and receiver to be basically the same for the signal to be transmitted from the source to the receiver correctly.
Go to page