PCB Layout

A Lighthearted Rant: The Loneliness of PCB Design
2026-04-22
In electronic R&D, PCB Layout is arguably the loneliest job. I’ll use a real example to explain why.
How to Calculate Delay Skew Between Transmission Lines
2026-04-22
Timing is critical in circuit design, and skew (delay difference) is a key factor in signal integrity. Excessive skew causes timing violations and product failure. This article introduces two methods to calculate skew without PCB design tools: using PLTS and ADS.
How to Choose Filter Capacitors?
2026-04-22
Many engineers ask: Since capacitive reactance Xc = 1/(2πfC), why do large capacitors filter low frequencies and small capacitors filter high frequencies? This article explains the physics, rules, and practical selection of filter capacitors.
How to Choose Between 7 Types of PCBA Substrates
2026-04-22
Choosing the right PCBA substrate is critical for product performance, reliability, and cost. Selection depends on application, budget, performance requirements, and manufacturing process. Below are the 7 common PCBA substrate types with their characteristics and best‑use cases.
Engineer’s Application Note: Gigabit Ethernet Device Design & PCB Routing Guide
2026-04-22
This document provides PCB design and routing guidelines for Microchip 10/100/1000 Mbps Ethernet devices, focusing on signal integrity, EMI, and ESD.
4 Key Points for Optimizing PCB Design for Manufacturability (DFM) of Type‑C Ports
2026-04-21
Type‑C has become the dominant universal interface, even adopted by Apple to replace Lightning. It offers reversible plugging, small size, high speed, and high power delivery. This article explains how to optimize USB Type‑C PCB design for better manufacturability.
Typical Case Analysis of Electrostatic Discharge (ESD) Problems
2026-04-21
This article analyzes ESD failures caused by software design and PCB loop design, based on two real engineering cases.
Several Common Routing Types in PCB Design
2026-04-21
Choosing the right routing style in PCB design significantly affects circuit performance and reliability. Below are common routing types with their advantages, suitable for different design requirements.
Go to page