With the rapid development of 5G communication, satellite navigation, microwave radar and millimeter-wave technology, the application demand for high-frequency PCBs continues to rise. The substrate material is the core factor determining the high-frequency performance of printed circuit boards. Reasonable selection of high-frequency PCB substrate models is the premise to ensure signal transmission quality, stability and product reliability.
With the rapid development of 5G communication, satellite navigation, microwave radar and millimeter-wave technology, the application demand for high-frequency PCBs continues to rise. The substrate material is the core factor determining the high-frequency performance of printed circuit boards. Reasonable selection of high-frequency PCB substrate models is the premise to ensure signal transmission quality, stability and product reliability.
1. Basic Definition of High-Frequency PCB Substrates
High-frequency PCB substrates refer to special electronic laminate materials applicable to 1GHz and above high-speed and high-frequency signal scenarios. Such materials feature low dielectric constant (Dk), low dielectric loss (Df), stable temperature characteristics and excellent high-frequency insulation performance. They are mainly used in radio frequency communication, aerospace, automotive radar, millimeter-wave antenna and other fields.
Common conventional FR-4 substrates are limited by dielectric properties, which are only suitable for low-frequency circuit design below 1GHz, and cannot meet the low-loss transmission requirements of high-frequency high-speed signals.
2. Key Performance Parameters for High-Frequency Substrate Selection
2.1 Dielectric Constant (Dk)
The dielectric constant must be low and stable. Too high Dk will reduce the signal transmission speed and easily cause signal delay and impedance deviation. The Dk value of high-frequency substrates is generally controlled within 2.0~4.0.
2.2 Dielectric Loss (Df)
Also known as dissipation factor, it is the core indicator of signal attenuation. The lower the Df value, the smaller the high-frequency signal transmission loss. High-frequency and millimeter-wave circuits require Df to be less than 0.005.
2.3 Thermal Expansion Coefficient (CTE)
It includes X/Y axis and Z axis thermal expansion coefficients. Matching CTE with copper foil can effectively avoid pad shedding, via crack and board warpage caused by temperature cycling.
2.4 Thermal Conductivity
High-power high-frequency circuits require substrates with high thermal conductivity to timely export heat, reduce local temperature rise and ensure long-term stable operation of equipment.
2.5 Water Absorption
Low water absorption ensures stable electrical performance in humid environments; excessive water absorption will lead to increased Dk/Df and deteriorated high-frequency performance.
3. Classification and Introduction of Mainstream High-Frequency PCB Substrates
3.1 Rogers Series Substrates
Rogers is the most widely used high-frequency substrate brand in the industry, with complete models and stable performance.
- RO4000 Series: Low dielectric loss, suitable for 5G base stations, microwave antennas;
- RO3000 Series: Ceramic filled PTFE material, ultra-low Dk/Df, for millimeter-wave radar;
- RT/duroid Series: Glass fiber reinforced PTFE, excellent mechanical stability, suitable for aerospace high-frequency circuits.
3.2 PTFE (Polytetrafluoroethylene) Substrates
PTFE substrate has the lowest Dk and Df among all PCB substrates, excellent high-frequency performance, but high cost and poor process machinability. It is mostly used in high-end millimeter-wave, military aerospace and precision radar fields.
3.3 Modified Epoxy High-Frequency Substrates
On the basis of traditional FR-4, low-dielectric resin and filler are added to reduce Dk and Df. The cost is moderate, the process compatibility is good, and it is suitable for medium and high-frequency civil communication products with cost requirements.
3.4 Ceramic Substrates
Alumina, aluminum nitride and other ceramic substrates feature ultra-high thermal conductivity, high insulation and stable high-frequency performance. They are mainly used in high-power radio frequency modules, automotive electronic power high-frequency circuits.
4. High-Frequency PCB Substrate Selection Principles
- Select by Operating Frequency: The higher the signal frequency, the stricter the requirements for Dk and Df; millimeter-wave scenarios prefer PTFE and Rogers high-end models.
- Select by Transmission Distance: Long-distance high-frequency signal transmission must adopt low-loss substrates to reduce signal attenuation.
- Select by Power Density: High-power equipment prioritizes substrates with high thermal conductivity and low Z-axis CTE.
- Select by Application Environment: Harsh environments such as high temperature and humidity require substrates with low water absorption and stable temperature characteristics.
- Balance Cost and Performance: Civil medium-frequency products choose modified epoxy materials; high-end military and millimeter-wave products choose Rogers and PTFE substrates.
5. High-Frequency PCB Process and Manufacturing Requirements
- Strictly control substrate lamination pressure and temperature to avoid Dk parameter deviation caused by process abnormality.
- Adopt special drilling and routing process to prevent substrate delamination and burrs.
- Matching high-frequency surface treatment processes: ENIG, immersion silver and OSP are commonly used to ensure solderability and high-frequency conductive stability.
- Impedance strict control: In combination with substrate Dk value, precisely design trace width and dielectric thickness to realize accurate impedance matching.
6. Performance Test Verification
After PCB production, comprehensive performance verification shall be carried out, including impedance test, high-frequency signal loss test, thermal cycling reliability test, insulation performance test and mechanical strength test, to ensure the substrate and PCB meet design and application standards.
About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.