Categories

Optical chips and electrical chips

Optical chips and electrical chips: how to dance together on the top of packaging?
Mar 17th,2026 133 Views
With the rapid development of science and technology, the co-packaging technology of optical chip and electrical chip has become a hot spot in the field of electronics. This technology combines the advantages of optics and electronics, which makes it possible to realize higher speed and more stable data transmission. In this paper, the main methods of co-packaging technology of optical chip and electrical chip will be introduced in detail, and its characteristics and application prospect will be analyzed.


I. Introduction

The co-packaging technology of optical chip and electrical chip refers to integrating optical chip and electrical chip into the same package to realize the mutual conversion and transmission of photoelectric signals. The appearance of this technology not only improves the speed and stability of data transmission, but also greatly reduces energy consumption and cost. At present, the co-packaging technology of optical chip and electrical chip mainly includes monolithic integration, 2D integration packaging, 3D integration packaging and 2.5D integration packaging.

Second, monolithic integration

Monolithic integration is to process the optical chip and the electrical chip on the same chip to realize the direct conversion of photoelectric signals. This method does not need additional leads or connectors, thus minimizing the impedance mismatch caused by packaging. By combining two chipsets into one, the packaging process becomes simple and efficient. In addition, the monolithic integrated chip can be connected to the printed circuit board (PCB) through wire-bonds or Flip-Chip technology.

However, monolithic integration technology also has some challenges. First of all, the silicon light process node is relatively backward compared with the electric chip process. At present, the most advanced processes developed for monolithic integration are 45 nm and 32 nm processes, which have a certain gap in performance compared with the processes of 10 nm and below for electric chips. Secondly, monolithic integration also faces problems such as high waveguide loss, low photodiode responsivity and low photodiode bandwidth. Therefore, in practical application, it is necessary to comprehensively consider the integration of process and the balance of overall performance.

Third, 2D integrated packaging

2D integrated packaging is to place the optical chip and the electrical chip side by side on the printed circuit board, and interconnect them and connect them with the circuit board through leads. The advantage of this method is that it is easy to package and suitable for mass production. However, a significant disadvantage of 2D integrated package is its dependence on leads. Although the lead can reach a smaller diameter, the connection between the optical chip and the electrical chip is limited to one side, which seriously limits the number of input/output (I/O).

In order to overcome this limitation, researchers continue to explore new connection technologies, such as using thinner leads and more efficient connection methods, to improve the performance of 2D integrated packaging. In addition, by optimizing the layout and wiring, the signal transmission delay and loss can be further reduced, thus improving the overall performance.

Fourth, 3D integrated packaging

3D integrated packaging is to make optical chips and electrical chips in different layers on the same packaging substrate, and realize the input and output of optical signals through micro-optical systems or optical waveguides. At the same time, the electric chips are connected to different layers on the package substrate through wires or flexible printed circuit board. This method has the advantages of compact structure and easy realization of high-speed signal transmission.

However, 3D integrated packaging also faces some challenges. First of all, the compatibility between optical devices and electronic devices needs to be solved in the manufacturing process. Due to the different material and process requirements of optical devices and electronic devices, it is necessary to make fine adjustment and optimization in the design and manufacturing process. Secondly, the manufacturing cost of 3D integrated package is relatively high, which limits its wide application to some extent.

In order to reduce manufacturing costs and improve production efficiency, researchers are exploring new materials and technological methods. For example, advanced lithography technology and nano-imprint technology are used to manufacture high-precision and high-resolution optical devices; Using new conductive materials and interconnection technology to achieve more efficient electronic device connection.

V. 2.5D integrated package

2.5D integrated packaging is a kind of packaging method between 2D and 3D, in which multiple chips or devices are mounted on an Interposer and then connected to the printed circuit board through microbumps. This method combines the advantages of 2D and 3D packaging, which not only realizes high integration, but also reduces the manufacturing cost and complexity. At the same time, the 2.5D integrated package has good scalability and flexibility, and the number or types of chips can be increased or decreased according to requirements.

In the co-packaging of optical chips and electrical chips, 2.5D integrated packaging technology can give full play to its advantages. By installing the optical chip and the electrical chip on the same interposer, tighter photoelectric integration and more efficient signal transmission can be realized. In addition, the design of the intermediary layer can be flexibly adjusted to meet the needs of different application scenarios, such as data centers, communication networks, and the Internet of Things.

VI. Conclusion and prospect

Co-packaging technology of optical chip and electrical chip is one of the important development directions in the future electronic field. In this paper, four main methods of monolithic integration, 2D integration package, 3D integration package and 2.5D integration package are introduced in detail, and their characteristics and application prospects are analyzed. With the continuous emergence of new materials, new processes and new technologies, it is believed that the co-packaging technology of optical chips and electrical chips will make greater breakthroughs and progress in the future.

In the future research, we expect to see more innovative solutions to solve the current technical bottlenecks and challenges. At the same time, with the rapid development of 5G, Internet of Things, artificial intelligence and other technologies, the co-packaging technology of optical chips and electrical chips will play an increasingly important role in data centers, communication networks, autonomous driving and other fields. Let's wait and see the future development of this field!

About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.
Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.