Mounting holes in PCBs are important elements in electronic design. Every PCB designer will learn about the purpose and basic design of PCB mounting holes. Moreover, when mounting holes are connected to ground, some unnecessary trouble after installation can be avoided.
How can PCB holes be used to reduce EMI?
As the name suggests, PCB mounting holes help secure the PCB to the enclosure. However, this is their physical and mechanical purpose. In addition, in terms of electromagnetic function, PCB mounting holes can also be used to reduce electromagnetic interference (EMI). PCBs that are sensitive to EMI are usually placed in metal enclosures. To effectively reduce EMI, plated PCB mounting holes need to be connected to ground. After grounding and shielding in this way, any electromagnetic interference will be directed from the metal enclosure to ground. A common question asked by novice designers is: which ground should it be connected to? In common electronic devices, there are signal ground, chassis ground, and earth ground. As a rule of thumb, mounting holes must not be connected to signal ground. Signal ground is the reference ground for electronic components in your circuit design, and introducing electromagnetic interference into it is not a good thing.
What you need to connect is chassis ground. This is the convergence point of all grounding connections of the cabinet. Chassis ground should be connected at one point, preferably in a star configuration. This avoids ground loops and multiple ground connections. Multiple ground connections can cause slight voltage differences and cause current to flow between chassis grounds. The chassis ground is then connected to earth ground as a safety measure.
Why is a proper ground connection very important?
If the enclosure base of the PCB board is a metal enclosure, then the entire metal enclosure is earth ground. The ground wire of the 220V power supply is connected to earth, all interfaces need to be connected to earth, and screws also need to be connected to earth. In this way, interference entering during EMC testing is discharged directly to earth, ensuring that it does not interfere with the internal system. In addition, EMC protection devices must be provided at every interface and must be close to the interface. If it is a plastic enclosure, it is best to embed a metal plate in it. If this cannot be achieved, then more consideration must be given to routing and layout. Sensitive signal lines (clock, reset, crystal oscillator, etc.) need ground guarding, and filtering networks should be added (for chips, crystals, power supplies). Connecting plated mounting holes to chassis ground is the best practice, but it is not the only best practice to follow.
To ensure that your equipment is protected, your chassis ground must be connected to an appropriate ground. For example, if you build an automated parking payment machine without proper grounding, you may have customers complaining of "electric shock" when paying. This can happen when a customer touches a non-insulated metal part of the enclosure. A slight electric shock may also occur when the chassis of a computer power supply is not properly grounded. This can also occur when the grounding cable connecting the power outlet to the building ground is disconnected. This can result in a floating ground on the corresponding machine.
The principle of EMI shielding relies on a proper ground connection. Having a floating ground connection will not only give your customers a slight electric shock, but if your equipment short-circuits, it may endanger user safety. Proper grounding is important for safety and EMI shielding. Basic tips for designing PCB mounting holes. PCB mounting holes are often used in design. When installing mounting holes, there are several simple basic principles. First, pay attention to the coordinates of the mounting holes. An error here will directly result in your PCB not being correctly installed in its enclosure.
You also need to ensure that the size of the mounting holes fits the screws you choose. Generally, do not place mounting holes too far toward the edge of the PCB. Too little dielectric material at the edge may cause cracks in the PCB during installation or removal. You should also leave sufficient clearance between mounting holes and other components. Great circuit design software, such as Altium's series software Altium Designer, can accurately place mounting holes and define related clearance rules.
