Categories

Detailed Explanation of PCB Manufacturability Design Issues with CPU Chips

CPU is the abbreviation of Central Processing Unit, which is the most important and core component in a computer, equivalent to the human brain, used for thinking, analysis and calculation. At present, the more common CPUs on the market come from two brands: one produced by Intel Corporation and the other by AMD Corporation.
Jun 9th,2026 123 Views
CPU is the abbreviation of Central Processing Unit, which is the most important and core component in a computer, equivalent to the human brain, used for thinking, analysis and calculation. At present, the more common CPUs on the market come from two brands: one produced by Intel Corporation and the other by AMD Corporation.
All CPUs are connected to the motherboard through pin-type interfaces, and CPUs with different interfaces have different numbers of pins. The PCB package pad pins on the CPU motherboard are connected to other electronic components through traces. The more pins and the smaller the pin spacing, the more manufacturability problems will exist.

Pin Types

The component package pins of CPU chips generally adopt BGA or QFP types. BGA and QFP are two different package forms.
BGA (Ball Grid Array) is a ball grid array package, whose pins are connected to the PCB by welding through spherical pads arranged at the bottom of the package. The main characteristics of BGA package are high pin density, fast signal transmission speed, strong reliability and good heat dissipation, which are widely used in high-performance chips and system integration fields.
QFP (Quad Flat Package) is a four-sided flat package, whose pins are arranged in the package body at the bottom of the package and connected to the PCB by bonding wires or pads. The main characteristics of QFP package are large number of pins, simple interface, easy manufacturing and welding, which are suitable for many common solutions.
Therefore, the differences between BGA and QFP lie in their package forms, pin arrangements and application scenarios. BGA is mainly used in high-performance and large-scale system integration fields, while QFP can be widely used in many common application occasions.

Pin Design

1. Pin Fan-out

BGA fan-out is the process of connecting the pins of a BGA packaged chip to other devices or interfaces. Due to the high pin density of BGA packages, special design and arrangement of pin fan-out layout are required to ensure connection to other devices and interfaces on the PCB. The following introduces some commonly used BGA fan-out methods:
Reserve a Cross Channel in the Middle
The fan-out vias of the BGA chip are drilled outward for fan-out. The BGA is divided into four independent areas from top, bottom, left and right, and separated from the middle to fan out to the four sides respectively. The advantage of this fan-out method is that a cross channel can be reserved, which is convenient for inner layer and GND channel plane division and inner layer routing.
Direct Routing for the Outer Two Rows
Among the four sides of the BGA chip, if one trace is routed between two pads, the outer two rows of pads do not need to be fanned out, and can be directly routed outward on the surface layer, which can save electrical layers. If two traces are routed between two pads, the outer three rows of pads do not need to be fanned out. After all leads are routed out of the BGA area, the outgoing traces can be scattered to increase the distance between lines, so as to reduce crosstalk between high-speed signals.
Pay Attention to the Cutting of Power and GND Planes
Generally, the power and GND network pad pins of BGA chips are located in the middle part of the BGA. The power and GND networks are connected through inner layer planes. The fan-out direction of these pins should be noted. Usually, they are fanned out in one direction as a whole, so that the fanned-out pins are concentrated in one area, which is convenient for inner layer area division and avoids the cutting of power and GND planes.
VIPPO Method
The most common BGA fan-out method is the VIPPO (Via in Pad Plated Over) method (also known as via-in-pad). This method designs the through holes in the circuit board directly as small holes in the pads where the BGA pins are located, then seamlessly attaches the through holes to the chip pads, and thickens a layer of metal by electrolytic plating. This method can reduce crosstalk and improve signal integrity, and occupies less space when the number of pins is large.
It should be noted that the design of BGA fan-out needs to consider factors such as signal integrity, electrostatic protection, power layering and signal-to-noise ratio. Different fan-out methods should be adopted according to specific design requirements to ensure the reliability and stability of the circuit.
The package pins of QFP chips also need to be fanned out. QFP package pins are usually arranged in a grid pattern with relatively low density, so QFP fan-out is relatively simpler than BGA fan-out.

2. Filter Capacitor Placement

For CPU chips, due to their high load and high-speed characteristics during operation, sufficient filter capacitors need to be added around the power circuit for filtering to ensure the stability of the power line and noise suppression. In addition, filter capacitors need to be added as close to the back of the CPU as possible to ensure the best filtering effect of the capacitors on the CPU power supply. The specific design methods are as follows:
Determine the Required Capacitance Value
It is necessary to confirm the required capacitance value for selection according to the chip datasheet or official design specifications.
Determine the Capacitor Model
According to the capacitance value, select the appropriate capacitor model (such as solid capacitor or aluminum electrolytic capacitor, etc.). Considering the limited space on the back of the CPU, high-density capacitors and small capacitors can be considered for layout.
Determine the Layout Method
Arrange the selected capacitors as close to the back of the CPU as possible, adopting a symmetrical and centralized layout to ensure the uniform influence of the capacitors on the circuit.
Determine the Capacitor Routing
According to the needs of the circuit design, design appropriate capacitor routing to ensure that high-frequency noise can be fully suppressed, while avoiding cross-interference between capacitors. In PCB design, analog simulation tools are generally used to simulate the circuit to ensure the routing quality and stable performance.
Confirm the Electrolytic Polarity of Capacitors
For electrolytic capacitors, special attention must be paid to the polarity, otherwise it will cause capacitor damage.
In short, adding back capacitors in the PCB design of CPU chip component packages is an important measure to ensure circuit stability and reliability, which needs to be fully considered in the design.

PCB Manufacturability Design

The PCB design containing CPU chips needs to consider manufacturing feasibility and cost-effectiveness, generally including the following aspects:
Design of PCB Layer Structure
Generally speaking, the number of layers of PCB boards containing CPU chips should not be too many, generally not more than 10 layers. Too many layers will affect the manufacturing complexity and cost.
PCB Material Selection
Conventional FR4 materials with high cost performance can be selected, and high-performance materials such as RO4003C can also be selected. The specific selection depends on the design requirements and cost budget.
PCB Routing Planning
Reasonable routing planning is very important in the later stage of design and manufacturing process. The performance and manufacturability of PCB can be improved by using high-density routing technology and reasonable lead-out lines. At present, the manufacturing capability of most industries in the industry is 3/3mil line width and line spacing, and the smaller the line width and line spacing, the higher the cost.
PCB Protection and Heat Dissipation Design
CPU chips generate a lot of heat during operation, so heat dissipation design is required. At the same time, it is also necessary to protect the circuit board from the influence of external physical and chemical environments to ensure the stable operation of the CPU chip.
In short, the PCB design of CPU chips needs to fully consider manufacturing feasibility and cost-effectiveness, and comprehensively consider various factors to design a finished product that meets the requirements.

About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.
Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.