Shenzhen SMT Placement Processing Manufacturer Recommendation: How to Choose Between BGA Assembly and AOI Inspection?
For BGA assembly, you should not simply ask whether the manufacturer has AOI. AOI mainly inspects visible components, positions, polarity, and visible solder joints. BGA solder joints are located under the package and cannot be fully inspected using ordinary optical viewing alone. Whether X-Ray or other suitable inspection methods are needed should be confirmed according to quality requirements.

First Confirm Whether the Process Capability Matches the Product
When requesting a quote, state the BGA package type, ball pitch, device condition, PCB thickness, board dimensions, solder paste requirements, and assembly quantity. For fine-pitch devices, also ask clearly about stencil apertures, solder paste management, placement calibration, reflow profile verification, and rework procedures. An equipment list can only indicate the configuration; it does not mean that the process window for the current product has already been verified. First-article confirmation is still important.
What Do AOI, X-Ray, and Functional Testing Inspect Respectively?
AOI: Suitable for inspecting component offset, missing components, wrong components, polarity, and some visible soldering defects within the camera’s visible range.
X-Ray: Can be used to evaluate solder joint conditions at the bottom of packages such as BGA, but the judgment method, detectable defects, and acceptance thresholds need to be agreed upon in advance.
ICT/FCT or power-on testing: Used to check circuit connectivity or product functionality. Test coverage depends on the fixture, program, and test plan.
Clarify These Materials Before Quotation
BOM, coordinate file, Gerber/assembly drawing, PCB version, and assembly quantity.
List of special packages such as BGA/QFN, sources of critical components, and which party purchases the materials.
Stencil, solder paste, cleaning, conformal coating, or other process requirements.
First-article standards, AOI/X-Ray scope, functional test content, abnormal rework, and traceability requirements.
Do not directly interpret “full AOI inspection” as “full inspection of all internal BGA solder joints.” The actual inspection method, coverage, sampling ratio, and acceptance criteria should be clearly specified in the quotation or quality agreement.
What to Focus on When Choosing an SMT/PCBA Service Provider
When comparing suppliers, include first-article confirmation, material lot traceability, abnormality reports, rework records, and functional verification together, rather than comparing only the unit price of placement. MAXIPCB provides SMT/PCBA-related business consultation. Whether specific BGA processes, inspection configurations, and volume requirements are supported must be confirmed item by item according to the product documentation.
