The fundamental purpose of PCB surface finishing is to ensure excellent solderability and electrical performance. Since copper in nature tends to form oxides when exposed to air and cannot remain in its elemental state for a long time, additional treatments are required for copper surfaces.
The fundamental purpose of PCB surface finishing is to ensure excellent solderability and electrical performance. Since copper in nature tends to form oxides when exposed to air and cannot remain in its elemental state for a long time, additional treatments are required for copper surfaces.
There are various PCB surface finishing processes available, among which the common ones include Hot Air Solder Leveling (HASL), Organic Solderability Preservative (OSP), Full-Board Electroplated Nickel-Gold, Electroless Nickel Immersion Gold (ENIG), Immersion Tin (ImSn), Immersion Silver (ImAg), Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG), and Electroplated Hard Gold.
1. Hot Air Solder Leveling (HASL, Tin Spraying)
The typical process flow of HASL is: micro-etching → preheating → flux coating → tin spraying → cleaning.
Hot Air Solder Leveling, also known as hot air solder leveling (commonly called tin spraying), is a process that coats molten tin (lead) solder on the PCB surface and levels it with heated compressed air. This forms a coating layer that resists copper oxidation and provides excellent solderability. During HASL, a copper-tin intermetallic compound is formed at the bonding interface between the solder and copper.
For PCB HASL processing, the board is immersed in molten solder; air knives level the liquid solder before solidification, minimize the meniscus of solder on copper surfaces, and prevent solder bridging.
HASL is divided into vertical and horizontal types, and the horizontal type is generally preferred for its uniform coating thickness and compatibility with automated production.
Advantages: Long storage life; complete wetting of copper surfaces after PCB fabrication (fully covered with tin before soldering); suitable for lead-free soldering; mature process with low cost; ideal for visual inspection and electrical testing.
Disadvantages: Not suitable for wire bonding; limited in SMT applications due to poor surface flatness; unsuitable for contact switch designs. Copper dissolution occurs during tin spraying, and the board undergoes high-temperature exposure. HASL has limitations for extremely thick or thin boards, with inconvenient production operation.
2. Organic Solderability Preservative (OSP)
The typical process flow is: degreasing → micro-etching → acid cleaning → pure water rinsing → organic coating → cleaning. The process control is relatively easier compared with other surface finishing processes.
OSP is a RoHS-compliant surface finishing process for PCB copper foils. OSP is the abbreviation of Organic Solderability Preservatives, also known as copper passivation agent or pre-flux. Simply put, OSP forms a thin organic film on clean bare copper surfaces via chemical reaction. This film provides oxidation resistance, thermal shock resistance, and humidity resistance to protect copper surfaces from further corrosion (oxidation, sulfidation, etc.) under normal environments. Meanwhile, the protective film can be quickly removed by flux at high soldering temperatures, allowing the exposed clean copper surface to bond with molten solder instantly to form robust solder joints.
Advantages: Simple process, ultra-flat surface, suitable for lead-free soldering and SMT; easy rework, convenient production operation, compatible with in-line processing; compatible with mixed surface finishes on one board (e.g., OSP + ENIG); low cost, eco-friendly.
Disadvantages: Limited reflow cycles (the film degrades after multiple soldering, generally stable for 2 cycles); not suitable for press-fit technology or wire bonding; inconvenient for visual inspection and electrical testing; requires N₂ protection for SMT; unsuitable for SMT rework; strict storage condition requirements.
3. Full-Board Electroplated Nickel-Gold
Full-board electroplated nickel-gold deposits a nickel layer followed by a gold layer on PCB surface conductors. The nickel layer mainly prevents diffusion between gold and copper. Current electroplated nickel-gold is categorized into two types: soft gold (pure gold with a matte surface) and hard gold (smooth, wear-resistant surface containing elements such as cobalt, with a bright surface). Soft gold is mainly used for wire bonding in chip packaging, while hard gold is applied for electrical interconnections in non-soldering areas.
Advantages: Long storage life (>12 months); suitable for contact switch designs and gold wire bonding; ideal for electrical testing.
Disadvantages: High cost due to thick gold plating; additional conductive traces required for gold finger electroplating; uneven gold thickness may cause brittle solder joints and reduce joint strength; poor plating uniformity; incomplete coverage of trace edges by electroplated nickel-gold; not suitable for aluminum wire bonding.
4. Electroless Nickel Immersion Gold (ENIG)
The typical process flow is: alkaline cleaning → micro-etching → pre-dipping → activation → electroless nickel plating → immersion gold. The process involves 6 chemical tanks and nearly 100 chemicals, making it a complex process.
ENIG coats a thick, highly conductive nickel-gold alloy on copper surfaces for long-term PCB protection. It also exhibits superior environmental resistance unmatched by other surface finishing processes. Furthermore, ENIG prevents copper dissolution, which benefits lead-free assembly.
Advantages: High oxidation resistance, long storage life, flat surface; suitable for soldering fine-pitch pins and small-pad components; the preferred finish for PCBs with contact switches (e.g., mobile phone boards); minimal degradation of solderability after multiple reflow cycles; usable as a substrate for COB (Chip On Board) wire bonding.
Disadvantages: High cost, relatively low solder joint strength; prone to black pad issues due to the electroless nickel process; nickel layer oxidation over time raises long-term reliability concerns.
5. Immersion Tin (ImSn)
Since all solders are tin-based, the tin layer is compatible with all types of solders. Immersion tin forms a flat copper-tin intermetallic compound, providing excellent solderability equivalent to HASL without the flatness issues of HASL. Immersion tin boards have a short storage life and must be assembled in the order of finishing completion.
Advantages: Suitable for in-line production; compatible with fine-circuit processing and lead-free soldering, especially ideal for press-fit technology; excellent flatness for SMT applications.
Disadvantages: Strict storage conditions (storage period preferably ≤6 months to control tin whisker growth); not suitable for contact switch designs; high requirements for solder mask process to avoid solder mask peeling; N₂ protection recommended for multiple reflows; inconvenient for electrical testing.
6. Immersion Silver (ImAg)
Immersion silver is a process between organic coating and electroless nickel/immersion gold, featuring simplicity and speed. Silver retains good solderability even when exposed to heat, humidity, and contamination, though it loses its luster. Immersion silver lacks the mechanical strength of electroless nickel/immersion gold as there is no nickel layer under the silver.
Advantages: Simple process, suitable for lead-free soldering and SMT; ultra-flat surface, low cost, ideal for ultra-fine circuits.
Disadvantages: Strict storage conditions, easy contamination; potential solder joint strength issues (micro-voids); prone to electromigration and galvanic corrosion of copper under solder mask; inconvenient for electrical testing.
7. Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG)
Compared with ENIG, ENEPIG adds a palladium layer between nickel and gold. Palladium prevents corrosion caused by displacement reactions and fully prepares for immersion gold deposition. Gold tightly covers the palladium layer to provide a reliable contact surface.
Advantages: Suitable for lead-free soldering; ultra-flat surface for SMT; compatible with through-hole electroless nickel-gold deposition; long storage life with undemanding storage conditions; ideal for electrical testing and contact switch designs; suitable for aluminum wire bonding and thick boards; strong environmental resistance.
8. Electroplated Hard Gold
Electroplated hard gold is applied to enhance product wear resistance and increase plug-and-unplug cycles.
Changes in PCB surface finishing processes have been relatively moderate and seemingly gradual, but it should be noted that long-term slow changes will lead to tremendous transformations. With increasing demands for environmental protection, PCB surface finishing processes will surely undergo dramatic changes in the future.
About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.