Categories

What is the Role of Solder Paste Inspection (SPI) in the SMT Production Process?

More than 50% of PCB component solder joint defects can be traced back to incorrect or suboptimal solder paste printing. While good solder paste printing practices are usually sufficient for small-batch production, solder paste inspection (SPI) should be carefully considered for high-volume printing.
Jun 18th,2026 160 Views
More than 50% of PCB component solder joint defects can be traced back to incorrect or suboptimal solder paste printing. While good solder paste printing practices are usually sufficient for small-batch production, solder paste inspection (SPI) should be carefully considered for high-volume printing.
Surface mount components are complex, relying on solder paste to connect the leads of integrated chip packages to the correct points on the PCB. A stencil is typically used to "print" the solder paste, which is then heated to melt the solder paste and fuse the connections. The fusion must be aligned, and the perfect volume of solder paste is crucial. As components become smaller, denser and more complex, the parts of the SMT production process involving solder paste have become hidden from the surface.

Why Consider Solder Paste Inspection (SPI)?

The solder printing process is an integral part of Surface Mount Technology (SMT) and is responsible for the majority of SMT placement defects, as outlined in our blog on the most common PCB SMT placement defects. For example, industry research shows that the amount of solder paste is related to joint quality and reliability: too much or too little translates into unreliable joints, which is an unacceptable outcome.
SPI was developed to meet the needs of manufacturers to closely monitor the alignment and volume of solder paste during the printing process as part of their quality management system.
SPI uses angled cameras that capture fast 3D images to measure the volume and alignment of the solder paste. SPI software also provides critical data about the printing process, helping to identify whether any defects are caused by solder or other sources, which can then be corrected early in the SMT placement process.
Because SPI can quickly identify any imperfect solder paste volumes or alignment process variations, it can significantly improve print quality and yield — ensuring efficient production of high-quality, high-performance PCBs while controlling rework costs.
SPI has evolved from 2D to 3D capabilities. 3D captures the height of the printed solder paste (for the Z-axis, also known as "Z"), which enables the equipment to more accurately measure the total volume of printed solder paste. 3D SPI, combined with Automated Optical Inspection (AOI), allows contract manufacturers to fully control and monitor both the solder paste printing process and the component placement process.