Categories

PCB Assembly and Soldering Technologies

This article is reprinted from: Cadence PCB and Packaging Resource Center
Jul 7th,2026 92 Views
This article is reprinted from: Cadence PCB and Packaging Resource Center

Key Points

  • PCB assembly and soldering constructs a complete physical circuit by selecting components, placing them, and soldering them onto the circuit board.
  • In Through-Hole Technology (THT), leaded or plug-in electronic components are soldered onto the circuit board to form the circuit.
  • Wave soldering is the most commonly used technology in both THT and SMT PCBA.
Printed Circuit Boards (PCBs) are essential components of electronic products; without PCBs, most electronic devices would be nothing more than unusable enclosures. PCBs are typically made of glass fiber bonded together with epoxy resin. The PCB assembly and soldering process constructs a complete physical circuit by selecting components, placing them, and soldering them onto the board. Inspection, testing, and feedback after PCB assembly and soldering ensure the successful manufacturing of the PCB. This article discusses the PCB assembly and soldering process.

1. PCB Assembly and Soldering

The PCB assembly and soldering process transforms a bare circuit board into a functional prototype. The PCB Assembly (PCBA) phase includes component placement, soldering, inspection, and finally testing. The PCBA process can be manual or automated, depending on the manufacturer's decisions at each stage.

Brief Overview of the PCBA Process

PCB design starts with a schematic diagram. Based on the schematic, the PCB layout is designed, which defines the electrical connection paths (called traces) in the circuit and the placement locations of components. Once the PCB layout design is approved, printing proceeds.
The fabricated PCB is a sheet of glass fiber material bonded with epoxy resin, with copper traces laid on the board. Components are fixed to the board through the soldering process, which uses a material called solder to secure components in designated positions. A PCB with components soldered onto it constitutes an assembled PCB. After attaching components to the PCB, it can be tested.
Three key technologies are used in the PCBA process, which are discussed in detail below.

2. PCB Assembly Technologies

There are three core technologies in the PCBA process:

Through-Hole Technology (THT) PCBA Process

In THT, leaded or plug-in electronic components are soldered onto the circuit board to form the circuit. The leads or terminals of the components are inserted through holes or pads on the PCB and soldered on the opposite side.

Surface Mount Technology (SMT) PCBA Process

There are two types of pads: through-hole and surface-mount. In PCBs using surface-mount pads, Surface Mount Devices (SMDs) are soldered to form the circuit. The soldering surface is also the surface where components are placed using solder paste.

Hybrid Technology PCBA Process

As circuit designs become more complex, it is impossible to rely on only one type of component. PCBs implementing complex circuits contain both plug-in and surface-mount components. Such PCBs utilizing mixed components are called hybrid technology circuit boards, and their assembly process employs the hybrid technology PCBA process.

3. Steps of Through-Hole Technology PCB Assembly

The sequence of the PCBA process varies depending on the mounting technology used. Below are the steps for THT PCB assembly:
  1. Component Placement: In THT PCBA, engineers first place components in their corresponding positions as specified in the PCB design file.
  2. Inspection and Correction: After all components are placed, the circuit board is inspected to verify accurate component placement. If inaccuracies are found, they are immediately corrected through the correction step. Inspection and correction must be completed before the soldering process.
  3. Soldering: The next step is soldering, which secures the placed components to their respective pads.
  4. Testing: Upon completion of the PCB assembly and soldering process, the circuit board is tested. Every PCB used in electronic equipment must undergo and pass this process.
Various soldering technologies exist, several of which are discussed below.

4. Soldering Technologies

All PCBA processes involve a soldering step regardless of the mounting technology used. Many different types of soldering technologies can be used to connect electrical components to PCBs, including:
  • Wave Soldering: The most commonly used technology in both THT and SMT PCBA. In wave soldering, the PCB moves over a wave-like stream of molten hot solder, which solidifies to secure the components.
  • Brazing: Operates at the highest temperature and provides the strongest solder joint. In brazing, metal components are attached by heating, which melts the base metal to accommodate the filler metal.
  • Reflow Soldering: Uses heated solder paste to attach components to the circuit board. The molten solder paste connects the pads and pins on the PCB.
  • Soft Soldering: A popular technology for securing compact, delicate components to printed circuit boards. In soft soldering, a metal space filler made of tin-lead alloy is heated with an electric soldering gun or gas to fix components to the board.
  • Hard Soldering: Provides stronger joints than soft soldering. It is used to bond metal parts such as copper, brass, silver, or gold at temperatures around 600°F.
During the PCB assembly and soldering process, if there are Design for Manufacture (DFM) errors in the PCB design, designers will have to return to the layout process to resolve these issues. This can occur multiple times, leading to significant design delays and wasted time, money, and manpower. Good DFM design helps maximize the smoothness of the entire design process, avoid unexpected issues, and ensure predictable construction costs.

About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.
Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.