Categories

General Requirements for High-Speed PCB Materials

As a qualified and excellent PCB design engineer, we must not only master high-speed PCB design skills but also understand relevant knowledge, such as the selection of high-speed PCB materials. This is because incorrect selection of PCB materials will adversely affect the signal transmission performance of high-speed digital circuits.
Jun 3rd,2026 116 Views
As a qualified and excellent PCB design engineer, we must not only master high-speed PCB design skills but also understand relevant knowledge, such as the selection of high-speed PCB materials. This is because incorrect selection of PCB materials will adversely affect the signal transmission performance of high-speed digital circuits.
The general requirements for high-speed PCB materials are as follows:
  1. Low loss, CAF resistance, heat resistance, and mechanical toughness (adhesion) (excellent reliability)
  2. Stable Dk/Df parameters (small variation coefficient with frequency and environmental conditions)
  3. Small tolerances for material thickness and resin content (excellent impedance control)
  4. Low copper foil surface roughness (reduces transmission loss)
  5. Prefer glass fiber cloth with high flatness and small window openings (reduces signal skew and loss)
Next, we will elaborate on the above five requirements for high-speed PCB materials.
The signal integrity of high-speed signals is mainly related to impedance, transmission line loss, and delay consistency. Signal integrity is considered guaranteed if appropriate waveforms and eye diagrams can be received at the receiving end. Therefore, the core parameter indicators for PCB material selection in high-speed digital circuits are Dk, Df, and transmission loss.
Whether for analog or digital circuits, the dielectric constant (Dk) of PCB materials is a critical parameter for material selection, as the Dk value is inextricably linked to the actual circuit impedance value applied to the material. When the Dk value of a PCB material changes—whether with frequency or temperature—the transmission line impedance of the circuit will undergo unexpected variations, which will adversely affect the signal transmission performance of high-speed digital circuits. If the Dk of the PCB material presents different values for harmonic components of different frequencies, the impedance will also vary across frequencies. The unintended changes in Dk value and impedance will cause a certain degree of loss and frequency offset of harmonic components, leading to distortion of the analog harmonic components of high-speed digital signals and thus reducing signal integrity.
Dispersion, which is closely related to the Dk value, is also an inherent characteristic of materials. The smaller the change in Dk value with frequency, the smaller the dispersion, and the better it is for high-speed digital circuit applications. Various factors such as polarization of dielectric materials, material loss, and surface roughness of copper conductors at high frequencies can cause circuit dispersion. Therefore, high-speed materials require stable Dk values, with the smaller the fluctuation under different frequency bands and temperatures, the better.
Transmission line losses usually include three types: dielectric loss, conductor loss, and radiation loss.
Dielectric loss, also known as insulation layer loss, increases with frequency for PCB signals. In particular, the frequency variation of high-order harmonic components of high-speed digital signals will cause severe amplitude attenuation, leading to distortion of high-speed digital signals. Dielectric loss is proportional to the signal frequency, the square root of the dielectric constant (Dk) of the insulation layer, and the dielectric loss factor (Df) of the insulation layer.
Conductor loss is related to the type of conductor (different types have different resistivities), the physical dimensions of the insulation layer and the conductor, and is proportional to the square root of the frequency. In PCB manufacturing, the main impact of different substrates on conductor loss is caused by the skin effect and surface roughness. When using different copper foils, the surface roughness of the signal lines varies. Affected by the skin effect/skin depth, the length of the copper teeth of the copper foil is directly related to the transmission quality of high-speed signals: the shorter the copper teeth, the better the high-speed signal transmission quality.
Radiation loss is related to dielectric properties and is proportional to the dielectric constant (Dk), dielectric loss factor (Df), and the square root of the frequency.
Reminder: Better materials correspond to higher costs. Engineers should strike a balance between meeting design requirements, manufacturability, and cost to achieve the optimal cost-performance ratio for the product.

About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.
Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.