- For connections involving 3 or more points, route the traces through each point sequentially to facilitate testing, and keep the traces as short as possible.
- Avoid routing traces between pins, especially between and around integrated circuit pins.
- Avoid parallel routing of traces on different layers to prevent the formation of parasitic capacitance.
- Prioritize straight lines or 45-degree broken lines for routing to avoid electromagnetic radiation.
- Ground lines and power lines should be at least 10-15 mil wide for logic circuits.
- Connect copper-poured ground lines as much as possible to increase the grounding area, and keep traces neat and orderly.
- Ensure uniform component placement to facilitate installation, insertion, and soldering operations. Place text on the corresponding silk screen layer in a reasonable position and correct orientation to avoid being blocked, which is convenient for production.
- Consider the mechanical structure when placing components. Clearly mark the polarity of SMD components on the package and final silk screen to avoid spatial conflicts.
- Current printed circuit boards can support 4-5 mil routing, but the general recommended parameters are 6 mil trace width, 8 mil trace spacing, and 12/20 mil pads. Routing should also consider the impact of pouring current.
- Place components of the same functional block together as much as possible, and do not place components too close to LCD zebra strips and other similar components.
- All vias should be coated with solder mask (set to negative one-time value).
- Do not place pads or vias under battery holders, and ensure reasonable PAD and VIL dimensions.
- After routing is completed, carefully check whether each connection (including NETLABLE) is actually connected (the lighting method can be used).
- Place oscillator circuit components as close to the corresponding IC as possible, and keep the oscillator circuit away from interference-prone areas such as antennas. Place a grounding pad under the crystal oscillator.
- Consider various methods such as structural reinforcement and hollowing out for component placement to avoid excessive radiation sources.
About Maxipcb
Maxipcb empowers innovators to turn cutting-edge technologies into reality.
We offer one-stop solutions for design, simulation, testing, PCB manufacturing, component procurement and SMT assembly, enabling efficient development, rapid deployment and risk control across the full product lifecycle.Serving the world in communications, industrial automation, aerospace, automotive, semiconductor and beyond, we build a safer, more connected future together.