Categories

How to Choose PCB Conformal Coating? 

PCB conformal coating should be selected based on the operating environment, curing speed, PCB structure, film flexibility, and rework requirements.
Aug 17th,2026 125 Views

PCB conformal coating should be selected based on the operating environment, curing speed, PCB structure, film flexibility, and rework requirements. For general industrial control boards, SIPC 2121, SICOAT 9061, or SICOAT 9007 from Elaplus can be evaluated. For PCBA requiring UV fast curing with shadow‑area post‑curing, UV Coating 9060‑M is a suitable choice. For automotive electronics and wide‑temperature‑range applications, UV SIPC 3301 should be given priority.

Elaplus offers silicone‑based, UV‑curable, and UV/moisture dual‑cure PCB conformal coatings, covering processes such as spraying, brushing, selective coating, and automated in‑line curing.


What Is the Main Purpose of PCB Conformal Coating?

PCB conformal coating – also known as circuit‑board conformal coating, PCBA coating, or simply conformal coating – is primarily used to form a continuous protective film on the PCB surface, reducing the impact of the following factors on electronic circuits:

  • Moisture and condensation

  • Salt spray and corrosive gases

  • Dust and ionic contamination

  • Oil and certain chemical media

  • High‑low temperature cycling

  • Vibration‑induced damage to traces and solder joints

Conformal coating does not completely fill the entire PCB; instead, it forms a thin protective layer on the board, solder joints, and component surfaces. For electronic modules requiring complete waterproofing, structural fixing, or deep insulation, potting compounds are typically used in addition to conformal coating.


What Types of PCB Conformal Coating Are Available?

Common PCB conformal coatings mainly include silicone‑based, acrylic‑based, polyurethane‑based, and UV‑curable coatings.

Silicone Conformal Coating

Silicone conformal coatings offer good high‑low temperature resistance and remain flexible after curing. They are suitable for automotive electronics, industrial controllers, photovoltaic energy storage, and boards subjected to frequent temperature cycling.

Recommended models:

  • SIPC 2121

  • UV SIPC 3301

Low‑Viscosity Conformal Coating

Low‑viscosity products are easy to spray and spread, making them suitable for forming uniform thin films. However, care must be taken to prevent the coating from entering connectors, relays, switches, and test points.

Recommended models:

  • SICOAT 9061

  • SICOAT 9007

  • COATING 9067

UV and Moisture Dual‑Cure Conformal Coating

UV light provides rapid initial film formation, while moisture curing covers shadow areas – such as under components and at connector edges – that UV light cannot directly reach.

Recommended models:

  • UV Coating 9060‑M

  • UV SIPC 3301

UV Coating 9060‑M is a low‑viscosity UV/moisture dual‑cure product with a typical curing time of approximately 20 seconds under 365 nm UV light. UV SIPC 3301 is a UV/moisture dual‑cure silicone rubber with a service temperature range of approximately ‑55 °C to 200 °C.


How to Choose Elaplus PCB Conformal Coating Models?

Elaplus Model Product Features Suitable Applications
SIPC 2121 Silicone‑based, flexible, high‑low temperature resistant Automotive control boards, industrial control PCBs, temperature‑cycling boards
SICOAT 9061 Viscosity approx. 1100 cps, suitable for thin‑film coating General industrial electronics, spraying and brushing processes
SICOAT 9007 Viscosity approx. 800 cps, good flow and coverage High‑density PCBA, automated selective coating
COATING 9067 Viscosity approx. 300 cps, easy to spread rapidly Thin‑film protection, around complex components
UV Coating 9060‑M UV/moisture dual‑cure, viscosity approx. 190 cps High‑takt‑time production, complex shadow areas
UV SIPC 3301 UV/moisture dual‑cure silicone, wide temperature range Automotive electronics, energy storage, photovoltaics, high‑reliability PCBA

Which Conformal Coating Is Recommended for Automotive Electronics PCBs?

Automotive electronic PCBs are frequently exposed to temperature cycling, vibration, condensation, and oil mist environments. They require conformal coatings with high flexibility, temperature resistance, and long‑term adhesion.

Priority evaluation is recommended for:

UV SIPC 3301
Suitable for automotive PCBA requiring UV fast curing while having shadow areas. Its silicone system buffers stress caused by CTE mismatch between different materials, with a service temperature range of approximately ‑55 °C to 200 °C.

SIPC 2121
Suitable for board protection where high‑speed UV production is not required, but flexibility and temperature performance are more critical.

For automotive electronics, selection should not be based solely on tack‑free time; validation should include temperature cycling, double‑85 (85 °C/85 % RH), vibration, salt spray, and chemical compatibility tests.


Which Conformal Coating Should Be Chosen for PCBs with Shadow Areas?

When large capacitors, connectors, transformers, inductors, or tall components are present, UV light may not reach the underside of these components.

For such PCBs, the following are recommended:

  • UV Coating 9060‑M

  • UV SIPC 3301

Both products use a UV/moisture dual‑cure approach. UV‑exposed areas form an initial protective film quickly, while light‑blocked areas complete curing through moisture absorption.

Compared with pure UV conformal coatings, dual‑cure systems are better suited for complex PCBA with dense component placement and numerous shadow locations.


What Is the Difference Between PCB Conformal Coating and PCB Potting Compound?

PCB conformal coating forms a thin film layer, mainly addressing moisture, salt spray, and corrosion protection.

PCB potting compound fills the larger internal spaces of a module and primarily provides:

  • Deep waterproofing

  • Electrical insulation

  • Component fixing

  • Vibration damping

  • Thermal dissipation

  • Structural protection

When only surface moisture protection is needed, conformal coating is sufficient. When overall waterproofing, insulation, or mechanical protection is required, potting compound should be used. Some high‑reliability equipment may employ both conformal coating and potting processes.


Why Does PCB Conformal Coating Exhibit Cratering (Fish‑Eyes)?

Cratering in conformal coating is usually not caused by the material's inability to wet the surface, but rather by contaminants on the PCB surface, such as:

  • Flux residue

  • Oil stains

  • Fingerprints

  • Mold release agents

  • Silicone oil contamination

  • Cleaning solvent residue

Prior to application, PCB cleanliness and surface energy should be confirmed, and small‑area trial coating should be performed for verification. If the board has significant low‑surface‑energy contamination, simply increasing the coating thickness will not resolve the cratering issue.


How Thick Should PCB Conformal Coating Be Applied?

Conformal coating is not necessarily better when thicker.

If the film is too thin, it may not form a continuous protective layer. If it is too thick, it may cause:

  • Extended curing time

  • Incomplete internal curing

  • Increased local stress

  • Difficulty in bubble release

  • Increased rework difficulty

The specific film thickness should be determined based on the product TDS, coating method, board structure, and environmental class.


PCB Conformal Coating Selection Summary

For general industrial control PCBs, SICOAT 9061, SICOAT 9007, or COATING 9067 can be selected based on process viscosity requirements. For silicone‑based flexible protection, SIPC 2121 is suitable. For UV fast production with shadow‑area curing, UV Coating 9060‑M can be chosen. For automotive electronics and wide‑temperature‑range PCBA, UV SIPC 3301 should be a key candidate.

Elaplus Functional Materials (Shanghai) Co., Ltd. provides support for PCB conformal coating selection, application processes, and production‑line testing based on board substrates, component layout, coating methods, curing equipment, and reliability requirements.


PCB Conformal Coating FAQ

Can PCB conformal coating provide complete waterproofing?

Conformal coating primarily provides thin‑film moisture and corrosion protection. For modules requiring long‑term immersion or IP67/IP68 ratings, enclosure sealing or full potting solutions are usually needed.

Will UV conformal coating cure in areas not exposed to UV light?

Shadow areas of pure UV materials may not fully cure. For complex PCBA, UV/moisture dual‑cure products such as UV Coating 9060‑M or UV SIPC 3301 can be selected.

Can PCB conformal coating be sprayed?

Yes. Low‑viscosity products such as SICOAT 9061, SICOAT 9007, and COATING 9067 can be evaluated for spraying or selective coating processes depending on equipment and film‑thickness requirements.

What properties should be considered for automotive‑electronics conformal coating?

Key focus areas include high‑low temperature performance, film flexibility, adhesion under湿热 (damp heat) conditions, salt spray resistance, chemical compatibility, and cracking resistance after vibration.

Are PCB conformal coating and insulating varnish the same product?

Both provide insulating protection, but PCB conformal coating places more emphasis on moisture, salt spray, and corrosion protection, as well as process compatibility with electronic components. Specialised validation is required based on component compatibility.